Angles Gloss Meter

Product No: AGM-500/AGM-580

  • Description
  • Download
  • Inquiry

Basic Introduction

Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter meets the requirement of DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on.


Instrument Introduction

  • Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure highly precise of the measured data. Our gloss meters conform to JJG 696 standard for first class gloss meters. Every machine has metrology accreditation certificate from National Institute Of Quality Inspection and Research center
  • Every gloss meter made by Lisun has done the following test: 412 calibration tests; 43200 stability tests; 110 hours of accelerated aging test; 17000 vibration test
  • The shell is made by Dow Corning Ti SLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience.
  • We fully utilized every space of the device and specially custom made advanced high density lithium battery in 3000m AH, which ensures continuous testing for 54300 times.


Technical Parameters

Test Angle20°、60°、85°60°
Test light spot(mm))20°: 10*10

60°: 9*15

85°: 5*38

60°: 9*15
Test range20°: 0-2000GU

60°: 0-1000GU

85°: 0-160GU

60°: 0-1000GU
Test modesSimple mode, standard mode and sample testing mode
Repeatability0-100GU: 0.2GU

100-2000GU: 0.2%GU

AccuracyConform to JJG 696 standard for first class gloss meter
Test timeLess than 1s0.5s
Data storage100 standard samples; 10000 test samples
Size(mm)165*51*77 (L*W*H)
WeightAbout 400g
LanguageChinese and English
Battery capacity3000mAh lithium battery
PortUSB, Bluetooth (optional)
Upper-PC SoftwareInclude
Working Temperature0-40℃
Working Humidity<85%, no condensation
Accessories5V/2A charger, USB cable, operating manual, software CD, calibration boards, metrology accreditation certification